Multifunctional Non Woven Face Mask Making Machine Servo Shifted
Accurate Positioning
Introduction
This Non Woven Face Mask Making Machine is a fully automatic
one-to-two mask machine, one body machine drives two ear band
machines. After the main body machine outputs the mask body, the
mask body sheet is conveyed to the turning mechanism by a conveyor
belt structure. The reversing mechanism is used to flip the mask
plate onto the belt connected to the ear band machine, and then the
mask sheet is conveyed to the first mask plate on the front of the
ear band machine through the conveyor belt, and finally the mask
sheet is placed on the ear band by the cylinder pressing In the
mask plate of the machine, the ear band machine is used to complete
the welding of the ear bands of the mask and the edging, thereby
completing the production of an ear band mask product. This machine
adopts PLC, touch screen control, single-phase motor for main
conveyor belt, stepping motor turning, precise transmission, stable
control and adjustable speed.
Features
1. It’s all-in-one designed and full automatically from material
feeding to product finishing.
2. Product can be shaped at a constant pressure which is no harmful
to the materials but still with good filtration.
3. It’s servo shifted with accurate positioning, the knife is
imported to ensure a smooth cutting edge.
4. Multifunctional with reasonable design, high efficient.
Welding principle: by means of air compressor to provide air power into the cylinder
for a linear reciprocating motion of gas and raising the pressure
in compressor cylinder piston compression air supply from one side
of the piston can produce pressure, air pressure forces the pistons
to generate thrust, through the titanium alloy welding head with
two ultrasonic welding head surface rubbing against each other
(high frequency vibration of tens of thousands of times per second)
to form a fusion between the molecular layer
